Step 5: Unscrew the filter two complete turns. If it is too tight, you can typically use a quarter as a screw driver. Only loosen it two turns (but not less, either!).
20 seconds
Step 6: Fill the filter with hot water. Place the cover on and wait. Typically about 5 minutes. The water should not stream through, it should drip.
Step 7: When the dripping stops (i.e., all the water has passed through the filter), carefully remove the device, set aside, and start to enjoy. Personally, I stir up all the condensed milk, others leave it for the end. Also, you may add the condensed milk after the coffee is made. This is not critical. Finished